EN ISO 20345 Ratings Explained: SB, S1, S2 and S3 for Buyers
Safety footwear ratings look like a jumble of letters, but EN ISO 20345 follows a clear logic. SB is the baseline, and S1, S2 and S3 add protection in layers. Understanding that structure helps you specify the right boot instead of over- or under-buying.
The baseline every rated boot must meet
Before any S-rating applies, the toe cap must withstand a 200-joule impact — roughly a 20 kg object dropped from one metre — and a 15 kN compression force, while leaving a minimum clearance inside the toe box. That is the SB (Safety Basic) level. SB covers impact and compression only; it does not require anti-static properties, water resistance or a penetration-resistant midsole.
How the ratings build on each other
- S1 adds a closed heel area, anti-static properties (electrical resistance in the region of 10⁵ to 10⁹ ohms), energy absorption at the heel, and resistance of the outsole to fuel oil. It suits dry indoor environments such as assembly, warehousing and light industry.
- S1P adds a penetration-resistant midsole, rated to resist roughly 1,100 N of puncture force — protection against nails and sharp metal on otherwise dry ground.
- S2 builds on S1 by adding upper water penetration and absorption resistance (WRU), typically tested over about 60 minutes. It is aimed at damp environments such as food processing, cleaning and outdoor work in light wet conditions. S2 is not a puncture-resistant rating.
- S3 adds the penetration-resistant midsole and a cleated, slip-resistant outsole to everything in S2. It is the most specified high-protection rating for construction, mining, heavy industry and logistics, where impact, moisture and underfoot punctures can all occur together.
Think of them as cumulative: an S3 boot covers the core requirements of S2 and S1. The higher the number, the more hazards are addressed.
The extra codes that matter
The main rating is only part of the story. Additional codes describe specific properties:
- HRO — heat-resistant outsole, tested to 300°C for at least 60 seconds (welding, foundry).
- WR — whole-boot water resistance; WRU — water-resistant upper.
- CI / HI — cold or heat insulation for the foot.
- A — anti-static; ESD — electrostatic dissipative. These are different classifications and should not be treated as interchangeable.
- FO — fuel-oil-resistant outsole; E — energy-absorbing heel.
- SRA / SRB / SRC — different slip-resistance test combinations on ceramic and steel surfaces.
A critical point for specifiers: S3 does not automatically mean heat-resistant, electrically insulating or cut-resistant. Those require their own codes and their own test reports. Always read the full marking and the certificate.
How to specify correctly
Start with a hazard assessment of the actual workplace, not a preference for the highest letter. Identify the risks — impact, static, water, puncture, heat, slip — then match the rating and the extra codes to each one. Two boots both marked S3 can differ substantially in outsole compound, upper material, comfort and additional features, so the marking is a starting point rather than the whole decision.
For procurement teams, request the test report and certificate alongside the product data, and confirm that the marked rating corresponds to the exact model being supplied.
—
FAQ
Is S3 always the right choice? Only if the worksite has combined impact, moisture and puncture risks. For a dry warehouse, S1 or S1P is often sufficient, lighter and less costly.
What is the difference between S1P and S3? S1P adds puncture resistance to S1 for dry conditions. S3 adds puncture resistance plus water resistance and a cleated outsole on top of S1.
Does S3 mean slip-resistant? The cleated outsole is required, but formal slip ratings are the SRA/SRB/SRC codes. Check those separately.
Are anti-static and ESD the same? No. They are different electrical-resistance classifications and serve different environments.
Sources
EN ISO 20345 rating and additional-code descriptions from Huayu Testing technical references (huayutest.com, huayutest.com.cn) and hgshoe.cn.
